Exemples d’usage de "backset" en anglais avec traduction en russe

<>
Traductions: tous32 заднее расстояние23 autres traductions9
In this case, a backset requirement is not needed, because the dynamic test checks the performance of the system. В этом случае требования в отношении расстояния между затылком и подголовником не нужно, так как динамическое испытание позволяет оценить эффективность системы.
A proposal was made to incorporate in the gtr a test procedure that combines the displacement test evaluation with an evaluation of adjustable backset locking systems. Было внесено предложение включить в гтп процедуру испытания, объединяющую оценку результатов испытания на смещение с оценкой систем фиксации регулируемого расстояния между затылком и подголовником.
It was proposed to recommend a maximum backset of 55 mm for front outboard head restraints, using the Head Restraint Measuring Device (HRMD), as a measuring tool. Было предложено рекомендовать минимальное расстояние между затылком и подголовником, равное 55 мм для подголовников передних боковых сидений, с использованием в качестве измерительного инструмента устройства для измерения параметров подголовников (HRMD).
OICA presented a method to measure backset, with a limit of 55 mm, using the R-point as an initial reference point and the dimensions of the HRMD. МОПАП представила метод измерения расстояния между затылком и подголовником, предельное значение которого должно составлять 55 мм, с использованием точки R в качестве изначальной контрольной точки и размеров, полученных при помощи устройства HRMD.
In the U.S.A. Final Regulatory Impact Analysis concerning head restraints, we showed that by regulating the backset limit, we could increase the benefits of head restraints. В рамках подготовленной в США окончательной нормативной оценки воздействия, касающейся подголовников, мы показали, что путем установления предельных значений расстояния между затылком и подголовником можно увеличить выгоды от использования подголовников.
In the current draft of the gtr, the working group recommends that backset can be measured using the H-point or the R-point as the initial reference point. В рамках нынешнего проекта гтп рабочая группа рекомендует, чтобы при измерении расстояния между затылком и подголовником в качестве начальной точки отсчета использовалась точка Н или точка R.
To avoid these problems, these participants recommend a backset limit of 55 mm when measured from the R-point, which equates to a 70 mm limit when measured from the H-point. Для того чтобы избежать подобных проблем, эти участники рекомендуют предельное значение расстояния между затылком и подголовником в 55 мм в случае измерения от точки R, что соответствует расстоянию в 70 мм в случае измерения от точки Н.
She underlined the high benefits introduced by a backset limit of 55 mm (using the H-point), and noted the reduction of effectiveness in case of a limit of 70 mm as proposed by some delegates. Она подчеркнула, что введение предельного значения между затылком и подголовником в 55 мм (с использованием точки H) сулит значительные выгоды, и отметила, что предельное значение в 70 мм, предложенное некоторыми делегациями, ведет к снижению эффективности.
Contingent on expected positive results of validation testing, the working group has agreed to recommend that if the backset retention requirement is included, then following the 373 Nm load, the applied load will be reduced to zero for ten minutes, and then increased to 37 Nm, before measuring the displacement. При условии получения, как ожидается, положительных результатов испытаний, проводимых с целью подтверждения уже имеющихся результатов, рабочая группа решила рекомендовать, что в том случае, если будет включено требование о фиксации расстояния между затылком и подголовником, то после применения нагрузки в 373 Нм прилагаемая нагрузка должна быть уменьшена до нуля на десять минут, а затем увеличена до 37 Нм перед измерением смещения.
Les exemples sont fournis uniquement à des fins linguistiques, c'est-à-dire pour étudier l'utilisation de mots dans une langue et leurs traductions dans une autre. Ils sont extraits automatiquement des sources ouvertes en utilisant des algorithmes de recherche de données bilingues. Si vous trouvez une erreur d'orthographe, de ponctuation ou autre soit dans l'original ou dans la traduction, utilisez l'option "Signaler un problème" ou écrivez-nous.

Qu’est-ce que la traduction en contexte sur PROMT.One ?

La section « Contextes » de PROMT.One est votre outil de traduction en contexte, qui vous permet de trouver de vrais exemples d’usage de mots et d’expressions. Il vous suffit de saisir un mot, et le service affichera sa traduction en contexte : des phrases issues de sources bilingues où ce mot est utilisé avec sa traduction dans la langue cible. Cette approche aide à comprendre les nuances de sens et le bon usage dans la langue, qu’il s’agisse d’un terme rare ou d’une expression courante.

Des millions d’exemples d’usage tirés de textes authentiques

Des millions d’exemples de traduction sont collectés automatiquement à partir de textes déjà traduits : documents, sites web, livres, dialogues de films, etc. Vous pouvez ainsi voir un mot dans différentes situations, allant du style formel et professionnel au langage familier. Pour plus de confort, les résultats peuvent être filtrés par traduction spécifique ou par thème, et vous pouvez également effectuer une recherche au sein des exemples trouvés afin de repérer rapidement le contexte souhaité.

Comment la traduction en contexte aide à apprendre une langue

En utilisant la section « Contextes », vous enrichissez efficacement votre vocabulaire. Le service montre clairement comment les idiomes, les verbes à particule et les mots polysémiques se traduisent dans différents contextes. Cela facilite l’apprentissage des langues : vous mémorisez les nouveaux mots avec leur usage réel et voyez immédiatement une traduction correcte dans une langue vivante et authentique. Profitez de la traduction en contexte sur PROMT.One : apprendre une langue devient plus simple et plus motivant !