Usage examples of "flat bend test" in English with translation to Russian

<>
bend test on a circumferential weld, the inner surface in tension испытание на изгиб по кольцевому сварному соединению, напряжение на внутренней поверхности
bend test on a longitudinal weld, the inner surface in tension испытание на изгиб по продольному сварному соединению, напряжение на внутренней поверхности
flexibility in accordance with ASTM D522 Mandrel Bend Test of Attached Organic Coatings, using Test Method B with a 12.7 mm (0.5 in) mandrel at the specified thickness at-20°C. определение гибкости в соответствии с ASTM D522: Испытание несъемных органических покрытий на изгиб с помощью оправки, методом испытания B с помощью оправки диаметром 12,7 мм (0,5 дюйма) при установленной толщине и температуре-20°C.
One bend test on the circumferential weld, the outer surface in tension; and одно испытание на изгиб по кольцевому сварному соединению, напряжение на внешней поверхности; и
bend test on a longitudinal weld, the outer surface in tension испытание на изгиб по продольному сварному соединению, напряжение на внешней поверхности
One bend test on the circumferential weld, the inner surface in tension; одно испытание на изгиб по кольцевому сварному соединению, напряжение на внутренней поверхности;
One bend test on the longitudinal weld, the inner surface in tension; одно испытание на изгиб по продольному сварному соединению, напряжение на внутренней поверхности;
The bend test shall be carried out between a mandrel of diameter (d) and two circular supports separated by a distance of (d + 3e). Испытание на изгиб проводится с помощью оправки диаметром (d) и двух круглых опор, расположенных на расстоянии (d + 3е).
One bend test on the longitudinal weld, the outer surface in tension; одно испытание на изгиб по продольному сварному соединению, напряжение на внешней поверхности;
Diagram of bend test Схема испытания на изгиб
in the case of failure, the illumination above the line H-H shall not exceed the values of a passing beam according to paragraph 6.2.5.; in addition, on headlamps designed to provide a passing and/or a driving beam to become a bend lighting, a minimum illumination of at least 3 lux shall be fulfilled in test point 25 V (VV line, D 75 cm). в случае неисправности освещенность выше линии H-H не превышала значений ближнего света в соответствии с пунктом 6.2.5; кроме того, на фарах, предназначенных для ближнего света и/или дальнего света, используемого для освещения с автоматическим наклоном светового пучка, в испытательной точке 25 V (линия VV, D 75 см) должна обеспечиваться минимальная освещенность по крайней мере в 3 люкса.
in the case of failure, the illumination above the line H-H shall not exceed the values of a passing beam according to paragraph 6.2.6.; in addition, on headlamps designed to provide a passing and/or a driving beam to become a bend lighting, a minimum illumination of at least 5 lux shall be fulfilled in test point 25 V (VV line, D 75 cm). в случае неисправности освещенность выше линии H-H не превышала значений ближнего света в соответствии с пунктом 6.2.6; кроме того, на фарах, предназначенных для ближнего света и/или дальнего света, используемого для освещения с автоматическим наклоном луча, в испытательной точке 25 V (линия VV, D 75 см) должна обеспечиваться освещенность не менее 5 лк.
" 5.9.2. in the case of failure the illumination above the line H-H shall not exceed the values of a passing beam according to paragraph 6.2.5.; in addition, on headlamps designed to provide a passing and/or a driving beam to become a bend lighting, a minimum illumination of at least 5 lux shall be fulfilled in test point 25 V (VV line, D 75 cm). " 5.9.2 в случае неисправности освещенность, выходящая за пределы линии Н-Н, не превышала величин освещенности для луча ближнего света, указанных в пункте 6.2.5; кроме того, в случае фар, конструкция которых позволяет включать ближний и/или дальний свет для получения углового освещения, в испытательной точке 25 V (линия VV, D- 75 см) должна обеспечиваться минимальная освещенность по крайней мере в 5 люкс ".
" 5.5.2. In the case of failure the illumination above the line H-H shall not exceed the values of a passing beam according to paragraph 6.2.6.; in addition, on headlamps designed to provide a passing and/or a driving beam to become a bend lighting, a minimum illumination of at least 5 lux shall be fulfilled in test point 25 V (VV line, D 75 cm). " 5.5.2 В случае неисправности освещенность выше линии Н-Н не должна превышать значений ближнего света в соответствии с пунктом 6.2.6; кроме того, на фарах, предназначенных для ближнего света и/или дальнего света, использующегося для освещения с автоматическим наклоном луча, в испытательной точке 25 V (линия VV, D 75 см) должна обеспечиваться освещенность не менее 5 лк ".
in the case of failure the illumination above the line H-H shall not exceed the values of a passing beam according to paragraph 6.2.5.; in addition, on headlamps designed to provide a passing and/or a driving beam to become a bend lighting, a minimum illumination of at least 5 lux shall be fulfilled in test point 25 V (VV line, D 75 cm). в случае неисправности освещенность, выходящая за пределы линии Н-Н, не превышала величин освещенности для луча ближнего света, указанных в пункте 6.2.5; кроме того, в случае фар, конструкция которых позволяет включать ближний и/или дальний свет для получения углового освещения, в испытательной точке 25 V (линия VV, D- 75 см) должна обеспечиваться минимальная освещенность по крайней мере в 5 люкс.
That is the jacket found in the prisoner's flat, which I handed to our lab to test for bloodstains. В квартире подсудимого, я передал его на экспертизу на предмет пятен крови.
With regard to mining technology, it was reported that two bathymetric surveys had been conducted during the reporting year to identify a suitable flat area about 500 metres deep to carry out the operational test of the underwater crawler. В отношении добычной технологии было указано, что для выявления подходящего района с плоским рельефом и глубиной около 500 метров в целях проведения оперативных испытаний подводного аппарата на гусеничном ходу было проведено две операции по батиметрической съемке.
Flat with a surface kept free from local defects capable of influencing the test results; плоской и без поверхностных местных дефектов, способных повлиять на результаты испытания;
A cylindrical or prismatic cell is to be impacted with its longitudinal axis parallel to the flat surface and perpendicular to the longitudinal axis of the 15.8 mm diameter curved surface lying across the centre of the test sample. По цилиндрическому или призмообразному элементу удар наносится таким образом, чтобы продольная ось элемента параллельна плоской поверхности и перпендикулярна продольной оси криволинейной поверхности с диаметром выемки 15,8 мм, проходящей через центр испытываемого образца.
The test pieces shall be flat squares of side 100 mm having both surfaces substantially plane and parallel and having a fixing hole 6.4 in diameter drilled in the center, if necessary. Образцы должны быть плоскими, квадратной формы, со стороной 100 мм; их поверхности должны быть достаточно ровными и параллельными, в центре должно быть просверлено, в случае необходимости, отверстие для крепления диаметром 6,4 мм.
Examples of word usage in different contexts are provided solely for linguistic purposes, i.e. to study word usage in a sentence in one language and how they can be translated into another. All samples are automatically collected from a variety of publicly available open sources using bilingual search technologies.
If you find a spelling, punctuation or any other error in the original or translation, use the "Report a problem" option or write to us.

What is translation in context on PROMT.One

The “Contexts” section on PROMT.One is your translation-in-context tool that helps you find real examples of how words and phrases are used. Just enter a word and the service will show its translation in context — sentences from bilingual sources where this word is used together with its translation into the target language. This helps you understand subtle shades of meaning and correct usage in speech, whether it is a rare term or a common everyday phrase.

Millions of usage examples from real texts

Millions of translation examples are collected automatically from already translated texts: documents, websites, books, movie dialogues and more. Thanks to this, you can see a word in different situations — from formal business style to everyday colloquial speech. For convenience, the results can be filtered by a specific translation or topic, and you can also search within the examples found to quickly focus on the context you need.

How translation in context helps you learn a language

By using the “Contexts” section, you can effectively expand your vocabulary. The service clearly shows how idioms, phrasal verbs and polysemantic words are translated in different contexts. This makes language learning easier: you remember new words together with their real usage and immediately see correct translations in authentic, living language. Take advantage of context-based translation on PROMT.One — learning a language becomes easier and more engaging!