Usage examples of "test valve" in English with translation to Russian

<>
Pressures of all kinds relating to receptacles (such as test pressure, internal pressure, safety valve opening pressure) are always indicated in gauge pressure (pressure in excess of atmospheric pressure); however, the vapour pressure of substances is always expressed in absolute pressure. Все виды давления, относящиеся к сосудам (например, испытательное давление, внутреннее давление, давление срабатывания предохранительных клапанов), всегда указываются как манометрическое давление (давление, избыточное по отношению к атмосферному давлению); однако давление паров вещества всегда выражается как абсолютное давление.
" 6.2.2.7.7 For acetylene cylinders, with the agreement of the competent authority, the date of the most recent periodic inspection and the stamp of the body performing the periodic inspection and test may be engraved on a ring held on the cylinder by the valve. " 6.2.2.7.7 В случае баллонов для ацетилена дата последней периодической проверки и клеймо органа, проводящего периодическую проверку и испытание, могут, с согласия компетентного органа, быть выгравированы на кольце, удерживаемом на баллоне с помощью вентиля.
For acetylene cylinders, with the agreement of the competent authority, the date of the most recent periodic inspection and the stamp of the body performing the periodic inspection and test may be engraved on a ring held on the cylinder by the valve. В случае баллонов для ацетилена дата последней периодической проверки и клеймо органа, проводящего периодическую проверку и испытание, могут быть выгравированы, с согласия компетентного органа, на кольце, удерживаемом на баллоне с помощью вентиля.
" 6.2.5.8.7 For acetylene cylinders, with the agreement of the competent authority, the date of the most recent periodic inspection and the stamp of the body performing the periodic inspection and test may be engraved on a ring held on the cylinder by the valve. " 6.2.5.8.7 В случае баллонов для ацетилена дата последней периодической проверки и клеймо органа, проводящего периодическую проверку и испытание, могут быть выгравированы, с согласия компетентного органа, на кольце, удерживаемом на баллоне с помощью вентиля.
Vacuum valves on tanks with test pressures up to 4 bar are only permitted on tanks fitted with a safety valve. Вакуумные клапаны на цистернах с испытательным давлением до 4 бар разрешается устанавливать только на цистернах, снабженных предохранительным клапаном.
FMVSS No. 135 also includes requirements for a static parking brake test and several types of system failure tests, including stops with the engine off, ABS functional failure, proportional valve functional failure, hydraulic circuit failure, and power assist failure. FMVSS № 135 также содержит требования о статическом испытании стояночного тормоза и об испытаниях на несрабатывание систем некоторых типов, в том числе на остановку при выключенном двигателе, при функциональном несрабатывании АБС, при функциональном несрабатывании пропорционального клапана, при несрабатывании гидропривода и усилителя.
Aerosol products with a spray distance of less than 15 cm such as dispensing foams, mousses, gels and pastes or fitted with a metering valve, are excluded from this test. Аэрозольные продукты с расстоянием распыления менее 15 см, как, например, аэрозольные пены, муссы, гели и пасты или же распылители, снабженные дозирующим клапаном, по данному методу не испытываются.
If a vessel has cargo tanks with different valve opening pressures, the design and test pressures of each tank shall be entered in the certificate. Если судно имеет грузовые танки с различными давлениями срабатывания клапанов, то в свидетельстве должны быть указаны расчетное и испытательное давление каждого танка.
" Each valve shall be capable of withstanding the test pressure of the pressure receptacle and be connected directly to the pressure receptacle by either a taper thread or other means which meets the requirements of ISO 10692-2: 2001. " Каждый клапан (вентиль) должен быть в состоянии выдерживать испытательное давление, которому подвергается сосуд под давлением, и должен крепиться непосредственно к сосуду под давлением либо с помощью конического резьбового соединения, либо иным способом, отвечающим требованиям стандарта ISO 10692-2: 2001 ".
In the event of loss of the vacuum in a double-walled tank, or of destruction of 20 % of the insulation of a single-walled tank, the combination of the pressure relief devices safety valve and the bursting disc shall permit an outflow such that the pressure in the shell cannot exceed the test pressure. В случае разгерметизации вакуумного пространства в цистерне с двойными стенками или в случае разрушения 20 % изоляции одностенной цистерны комбинация устройств сброса давления предохранительный клапан и разрывная мембрана должны должна обеспечивать выпуск газа, с тем чтобы давление внутри корпуса не могло превысить испытательное давление.
Each plug or valve shall have a taper-threaded connection directly to the pressure receptacle and be capable of withstanding the test pressure of the pressure receptacle without damage or leakage; каждая пробка или каждый клапан непосредственно соединяются с сосудом под давлением с помощью навинчивающегося конуса и должны быть способны выдерживать испытательное давление сосуда под давлением без повреждений или утечки;
Tanks intended for the carriage of liquids having a vapour pressure of more than 110 kPa (1.1 bar) but not exceeding 175 kPa (1.75 bar) (absolute) at 50°C shall have a safety valve set at not less than 150 kPa (1.5 bar) (gauge pressure) and which shall be fully open at a pressure not exceeding the test pressure; otherwise they shall conform to 6.8.2.2.8. Цистерны, предназначенные для перевозки жидкостей, имеющих при 50°С давление насыщенных паров более 110 кПа (1,1 бара), но не более 175 кПа (1,75 бара) (абсолютное давление), должны иметь предохранительный клапан, отрегулированный на срабатывание при манометрическом давлении не менее 150 кПа (1,5 бара) и полностью открывающийся при давлении, не превышающем испытательное давление; в противном случае они должны соответствовать требованиям пункта 6.8.2.2.8.
He spent all night cramming for the test. Всю ночь перед тестом он зубрил.
The instant he did, Nyberg turned the valve to start repressurizing the airlock. Как только он сделал это, Найберг повернула кран, и в камеру пошел воздух.
There's nothing like close combat to test one's mettle. Что касается проверки собственной ретивости, ничто не сравнится с ближним боем.
If it moved to his mouth and he could no longer breathe, he would open a purge valve in his helmet to try to let some of the liquid out. Астронавт решил, что если пузырь переместится ко рту, и он не сможет больше дышать, ему придется открыть продувочный клапан в гермошлеме в попытке выпустить хотя бы часть жидкости.
I'm sure that they will pass the test. Уверен, что они сдадут тест.
She was having the same thoughts, and was on the verge of reaching for the valve. Она думала точно также, и готова была взяться за вентиль.
I'll put his courage to the test. Я проверю его на храбрость.
Prokhorov’s role was widely seen as a safety valve for limited criticism which could show that the world’s largest country and biggest oil producer was moving away from what is often called a managed democracy and attract votes from more radical parties in a parliamentary election on December 4. Прохорову отводилась в значительней мере роль предохранительного клапана, предназначенного утихомирить критиков и продемонстрировать на парламентских выборах 4 декабря, что самая большая в мире страна, крупнейший производитель нефти, отошла от так называемой управляемой демократии и привлекает голоса более радикальных партий.
Examples of word usage in different contexts are provided solely for linguistic purposes, i.e. to study word usage in a sentence in one language and how they can be translated into another. All samples are automatically collected from a variety of publicly available open sources using bilingual search technologies.
If you find a spelling, punctuation or any other error in the original or translation, use the "Report a problem" option or write to us.

What is translation in context on PROMT.One

The “Contexts” section on PROMT.One is your translation-in-context tool that helps you find real examples of how words and phrases are used. Just enter a word and the service will show its translation in context — sentences from bilingual sources where this word is used together with its translation into the target language. This helps you understand subtle shades of meaning and correct usage in speech, whether it is a rare term or a common everyday phrase.

Millions of usage examples from real texts

Millions of translation examples are collected automatically from already translated texts: documents, websites, books, movie dialogues and more. Thanks to this, you can see a word in different situations — from formal business style to everyday colloquial speech. For convenience, the results can be filtered by a specific translation or topic, and you can also search within the examples found to quickly focus on the context you need.

How translation in context helps you learn a language

By using the “Contexts” section, you can effectively expand your vocabulary. The service clearly shows how idioms, phrasal verbs and polysemantic words are translated in different contexts. This makes language learning easier: you remember new words together with their real usage and immediately see correct translations in authentic, living language. Take advantage of context-based translation on PROMT.One — learning a language becomes easier and more engaging!