Ejemplos del uso de "номинальной мощностью" en ruso
Traducciones:
todos24
rated power8
rated output2
rated capacity1
nominal capacity1
otras traducciones12
" х " и " у " относятся к основной (с высокой номинальной мощностью) нити накала, а не к оси отсчета.
" x " and " y " refer to the major (high-wattage) filament, not to the reference axis.
" х " и " y " относятся к основной (с высокой номинальной мощностью) нити накала, а не к оси отсчета.
" x " and " y " refer to the major (high-wattage) filament, not to the reference axis.
" 2.3.1.4 номинальная мощность (в следующем порядке: нить с высокой номинальной мощностью/с низкой номинальной мощностью для ламп с двумя нитями накала); номинальную мощность необязательно "
" 2.3.1.4. the rated wattage (in the sequence, high wattage/low wattage filament for dual-filament lamps); this need not be "
Установки для сжигания (котлоагрегаты и технологические нагреватели) с номинальной тепловой мощностью, превышающей 50 МВтт, или установки для сжигания с общей дымовой трубой и совокупной номинальной мощностью, превышающей 50 МВттс:
Combustion plants (boilers and process heaters) with a rated thermal input exceeding 50 MWth or combustion plants when combined to a common stack with a total rated input exceeding 50 MWth:
Установки для сжигания (котлоагрегаты и технологические нагреватели) с номинальной тепловой мощностью, превышающей 50 МВтт, или установки для сжигания с общей дымовой трубой и совокупной номинальной мощностью, превышающей 50 МВтт.
Combustion plants (boilers and process heaters) with a rated thermal input exceeding 50 MWth or combustion plants when combined to a common stack with a total rated input exceeding 50 MWth:
Ниже указываются специальные положения для установок для сжигания с номинальной тепловой мощностью, превышающей 50 МВтт, и для установок для сжигания с общей дымовой трубой и совокупной номинальной мощностью, превышающей 50 МВтт.
Special provisions for combustion plants with a rated thermal input exceeding 50 MWth and for combustion plants when combined to a common stack with a total rated input exceeding 50 MWth:
2/Максимальное боковое отклонение центра основной (с высокой номинальной мощностью) нити накала относительно двух взаимно перпендикулярных плоскостей, которые проходят через ось отсчета и одна из которых проходит через ось контрольных выступов.
2/Maximum lateral deviation of the major (high wattage) filament centre from two mutually perpendicular planes both containing the reference axis and one containing the axis through the reference keys.
2/Максимальное боковое отклонение центра основной (с высокой номинальной мощностью) нити накала относительно двух взаимно перпендикулярных плоскостей, которые проходят через ось отсчета и одна из которых проходит через ось контрольного штифта.
2/Maximum lateral deviation of the major (high wattage) filament centre from two mutually perpendicular planes both containing the reference axis and one containing the axis of the reference pin.
правильного расположения основной (с высокой номинальной мощностью) нити накала относительно оси отсчета и плоскости отсчета и оси, перпендикулярной в пределах ± 15°, плоскости, проходящей через центры цокольных штифтов и оси отсчета; и
the major (high wattage) filament is correctly positioned relative to the reference axis and reference plane and has an axis perpendicular, within ± 15°, to the plane through the centres of the pins and the reference axis; and whether
2/Максимальное боковое отклонение центра основной (с высокой номинальной мощностью) нити накала относительно двух взаимно перпендикулярных плоскостей, которые проходят через ось отсчета и одна из которых проходит через ось контрольных направляющих ключей.
2/Maximum lateral deviation of the major (high wattage) filament centre from two mutually perpendicular planes both containing the reference axis and one containing the axis through the reference keys.
номинальная мощность (в следующем порядке: нить с высокой номинальной мощностью/с низкой номинальной мощностью для ламп с двумя нитями накала); номинальную мощность необязательно указывать отдельно, если она является частью международного обозначения соответствующей категории лампы накаливания;
the rated wattage (in the sequence, high wattage/low wattage filament for dual-filament lamps); this need not be indicated separately if it is part of the international designation of the relevant filament lamp category;
9/Для нити накала под высокой номинальной мощностью точками, между которыми должно производиться измерение, являются точки пересечения (вид в направлении 1) бокового края экранирующей части колбы с внешней частью крайних витков, определение которых приведено в сноске 8.
9/For the high wattage filament, the points to be measured are the intersections, seen in direction 1, of the lateral edge of the shield with the outside of the end turns defined under footnote 8/.
Los ejemplos del uso de palabras en diferentes contextos se proporcionan únicamente con fines lingüísticos, es decir, para estudiar el uso de palabras en un idioma y sus opciones de traducción a otro. Están recopilados automáticamente de fuentes abiertas utilizando tecnología de búsqueda basada en datos bilingües. Si encuentras un error ortográfico o de puntuación en el original o en la traducción, utiliza la opción "Informar de un problema" o escríbenos.
En esta sección, puedes ver cómo se usan las palabras y expresiones en diferentes contextos con los ejemplos de traducciones realizadas por profesionales. La sección Contextos te ayudara a aprender inglés, alemán, español y otros idiomas. Aquí puedes encontrar ejemplos con las frases verbales, expresiones idiomáticas y palabras ambiguas en textos de diferentes estilos y temas.
Los ejemplos se pueden ordenar por traducciones y temas, y también se puede realizar una búsqueda más precisa en los ejemplos encontrados.
Publicidad