Sentence examples of "manifolds" in English

<>
Cylinder heads, camshafts, inlet manifolds. Головка циллиндров, распредвал, входящий коллектор.
The intake and exhaust manifolds are both fine. Впускной и выпускной коллекторы оба в порядке.
The manifolds, the discharge fittings (pipe sockets, shut-off devices), and the stop-valves shall be protected from being wrenched off by external forces. Коллекторы, фитинги для слива (соединительные муфты для труб, запорные устройства) и запорные вентили должны быть защищены от опасности срывания под воздействием внешних сил.
In order to avoid any loss of content in the event of damage, the manifolds, the discharge fittings (pipe sockets, shut-off devices), and the stop-valves shall be protected or arranged from being wrenched off by external forces or designed to withstand them. Во избежание любой потери содержимого в случае повреждения коллекторы, арматура опорожнения (соединительные муфты, запорные устройства) и запорные клапаны должны быть защищены или размещены таким образом, чтобы исключить опасность срывания под воздействием внешних нагрузок, или должны иметь такую конструкцию, которая могла бы выдерживать такие нагрузки ".
It blew the fuel injection manifold. Разорвало коллектор впрыска топлива.
I thought you might like to know that we salvaged the plasma manifold. Я думал, вы будете рады узнать, что мы нашли плазменный манифольд.
Fuel leaked into the manifold and caught fire. Топливо просочилось на выхлопной коллектор и загорелось.
Yeah, mymy stud cuff got caught on an air manifold. Да, я зацепилась шпильками за воздушный коллектор.
The exhaust manifold is cracked and the head's cooked. Выпускной коллектор треснул и "голова" вскипела.
The filling and discharge devices may be affixed to a manifold. Устройства для наполнения и опорожнения могут присоединяться к коллектору.
The filling and discharge devices may be fitted to a manifold. Устройства загрузки и разгрузки могут быть подсоединены к коллектору.
For exhaust emission calculation the total exhaust mass flow of the manifold shall be used. Для расчета выбросов необходимо использовать общую массу потока выхлопных газов из коллектора.
The manifold shall be designed for service in a temperature zone of-20°C to + 50°C. Коллектор должен проектироваться для использования в интервале температур от-20°С до + 50°С.
'Come the dawn, the engine had a new air filter, new injectors and a new inlet manifold. На рассвете, у двигателя был новый воздушный фильтр, и новый инжектор и новый входной коллектор.
The manifold shall be designed for service in a temperature range of-20°C to + 50°C. Коллектор должен проектироваться для использования в интервале температур от-20°С до + 50°С.
the joint between the cylinder head and the exhaust manifold is situated outside the heating air circuit; соединение между головкой блока цилиндров и выпускным коллектором расположено вне контура, по которому циркулирует воздух системы отопления;
Manifold means an assembly of piping and valves connecting the filling and/or discharge openings of the elements; Коллектор означает сборку трубопроводов и вентилей, соединяющих загрузочные и/или разгрузочные отверстия элементов.
" 1.2.6. of the exhaust measured at the point adjacent to the outlet flange (s) of the exhaust manifold (s) … … … … … … … … … …°C " " 1.2.6 отработавших газов, измеренная рядом с наружным (и) фланцем (ами) выпускного (ых) коллектора (ов) … … … … … … … … … …°C "
For a bundle of cylinders this mass will include the frame of the bundle and all permanently attached parts (cylinders, manifold, fittings and valve (s)). В случае связки баллонов в массу должна включаться масса рамы связки и всех постоянно соединенных частей (баллонов, коллектора, фитингов и вентиля (вентилей)).
Manifold piping leading to shut-off valves shall be sufficiently flexible to protect the valves and the piping from shearing, or releasing the pressure receptacle contents. Трубопроводы коллектора, ведущие к запорным вентилям, должны быть достаточно гибкими, чтобы защитить вентили и трубопроводы от срывания или выпуска содержимого сосудов под давлением.
Examples of word usage in different contexts are provided solely for linguistic purposes, i.e. to study word usage in a sentence in one language and how they can be translated into another. All samples are automatically collected from a variety of publicly available open sources using bilingual search technologies.
If you find a spelling, punctuation or any other error in the original or translation, use the "Report a problem" option or write to us.

In this section, you can see how words and expressions are used in different contexts using examples of translations made by professionals. The Contexts section will help you learn English, German, Spanish and other languages. Here you can find examples with phrasal verbs and idioms in texts that vary in style and theme. Examples can be sorted by translations and topics.

Learn foreign languages, see the translation of millions of words and expressions, and use them in your e-mail communication.