Sentence examples of "Коллектор" in Russian with translation "manifold"

<>
Головка циллиндров, распредвал, входящий коллектор. Cylinder heads, camshafts, inlet manifolds.
Топливо просочилось на выхлопной коллектор и загорелось. Fuel leaked into the manifold and caught fire.
Коллектор означает сборку трубопроводов и вентилей, соединяющих загрузочные и/или разгрузочные отверстия элементов. Manifold means an assembly of piping and valves connecting the filling and/or discharge openings of the elements;
Коллектор должен проектироваться для использования в интервале температур от-20°С до + 50°С. The manifold shall be designed for service in a temperature zone of-20°C to + 50°C.
[TRANS/WP.15/1998/12] [Коллектор конструируется, изготавливается и устанавливается таким образом, чтобы избежать повреждения от температурного расширения и сжатия, ударов и вибрации. [TRANS/WP.15/1998/12] [The manifold shall be designed, constructed and installed so as to avoid the risk of damage due to thermal expansion and contraction, mechanical shock and vibration.
предохранительный/вакуумный дыхательный клапан, который функционирует при обычных операциях по наполнению, сливу и перевозке, который регулирует небольшие отклонения давления и/или растрежения и который может иметь выход в паросборный коллектор; a pressure/vacuum vent valve which operates under normal filling, discharge and transport activities, which caters for minor fluctuations in pressure and/or vacuum, and which may vent into a vapour recovery manifold;
При необходимости должны использоваться приборы для измерения расхода топлива, расхода воздуха, температуры охладителя и масла, давления выхлопных газов и снижения давления на входе в коллектор, температуры выхлопных газов, температуры всасываемого воздуха, атмосферного давления, влажности и температуры топлива. Measuring instruments for fuel consumption, air consumption, temperature of coolant and lubricant, exhaust gas pressure and intake manifold depression, exhaust gas temperature, air intake temperature, atmospheric pressure, humidity and fuel temperature must be used, as required.
При необходимости используются приборы для измерения расхода топлива, расхода воздуха, температуры охлаждающей субстанции и смазки, противодавления отработавших газов и разрежения на входе в коллектор, температуры отработавших газов, температуры воздуха на впуске, атмосферного давления, влажности и температуры топлива. Measuring instruments for fuel consumption, air consumption, temperature of coolant and lubricant, exhaust gas pressure and intake manifold depression, exhaust gas temperature, air intake temperature, atmospheric pressure, humidity and fuel temperature shall be used, as required.
Коллектор для сжиженных токсичных газов (газов с классификационными кодами 2T, 2TF, 2TC, 2TO, 2TFC и 2TOC) должен быть сконструирован таким образом, чтобы можно было наполнять элементы по отдельности и не допускать сообщения между ними с помощью вентиля, который можно герметизировать. The manifold for liquefied toxic gases (gases of classification codes 2T, 2TF, 2TC, 2TO, 2TFC and 2TOC) shall be so designed that the elements can be filled separately and be kept isolated by a valve capable of being sealed.
Впускной и выпускной коллекторы оба в порядке. The intake and exhaust manifolds are both fine.
Устройства для наполнения и опорожнения могут присоединяться к коллектору. The filling and discharge devices may be affixed to a manifold.
Устройства загрузки и разгрузки могут быть подсоединены к коллектору. The filling and discharge devices may be fitted to a manifold.
Для расчета выбросов необходимо использовать общую массу потока выхлопных газов из коллектора. For exhaust emission calculation the total exhaust mass flow of the manifold shall be used.
" 1.2.6 отработавших газов, измеренная рядом с наружным (и) фланцем (ами) выпускного (ых) коллектора (ов) … … … … … … … … … …°C " " 1.2.6. of the exhaust measured at the point adjacent to the outlet flange (s) of the exhaust manifold (s) … … … … … … … … … …°C "
В случае связки баллонов в массу должна включаться масса рамы связки и всех постоянно соединенных частей (баллонов, коллектора, фитингов и вентиля (вентилей)). For a bundle of cylinders this mass will include the frame of the bundle and all permanently attached parts (cylinders, manifold, fittings and valve (s)).
Трубопроводы коллектора, ведущие к запорным вентилям, должны быть достаточно гибкими, чтобы защитить вентили и трубопроводы от срывания или выпуска содержимого сосудов под давлением. Manifold piping leading to shut-off valves shall be sufficiently flexible to protect the valves and the piping from shearing, or releasing the pressure receptacle contents.
Трубопроводы коллекторов, ведущие к запорным вентилям, должны быть достаточно гибкими, чтобы предохранять вентили и трубопроводы от сдвига или выпуска содержимого сосудов под давлением. Manifold piping leading to shut-off valves shall be sufficiently flexible to protect the valves and the piping from shearing or releasing the pressure receptacle contents.
Трубопроводы коллекторы, ведущие к запорным вентилям, должны быть достаточно гибкими, чтобы защитить вентили и трубопроводы от срывания или выпуска содержимого сосудов под давлением. Manifold piping leading to shut-off valves shall be sufficiently flexible to protect the valves and the piping from shearing, or releasing the pressure receptacle contents.
Коллекторы, фитинги для слива (соединительные муфты для труб, запорные устройства) и запорные вентили должны быть защищены от опасности срывания под воздействием внешних сил. The manifolds, the discharge fittings (pipe sockets, shut-off devices), and the stop-valves shall be protected from being wrenched off by external forces.
В отступление от этого требования, в случае перевозки № ООН 1001 ацетилена растворенного испытательное давление для коллектора транспортного средства- батареи или МЭГК должно составлять не менее 300 бар. By derogation from this requirement, the test pressure for the manifold of battery-vehicle or MEGC shall not be less than 300 bar for UN No. 1001 acetylene, dissolved.
Examples of word usage in different contexts are provided solely for linguistic purposes, i.e. to study word usage in a sentence in one language and how they can be translated into another. All samples are automatically collected from a variety of publicly available open sources using bilingual search technologies.
If you find a spelling, punctuation or any other error in the original or translation, use the "Report a problem" option or write to us.

In this section, you can see how words and expressions are used in different contexts using examples of translations made by professionals. The Contexts section will help you learn English, German, Spanish and other languages. Here you can find examples with phrasal verbs and idioms in texts that vary in style and theme. Examples can be sorted by translations and topics.

Learn foreign languages, see the translation of millions of words and expressions, and use them in your e-mail communication.