PROMT.One

Exemples d’usage de "мягкие стали" en russe avec traduction en anglais

Traductions:
мягкие стали (за исключением перевозки сжиженных охлажденных газов класса 2); mild steels (except for refrigerated liquefied gases of Class 2);
Цистерны, изготовленные из более прочных сталей, чем мягкие стали, определяемые в МПОГ/ДОПОГ, должны поэтому иметь стенки большей толщины, принимая во внимание, что цистерны из мягких сталей, имеющих значение предела прочности на разрыв, превышающие 440 Н/мм2, должны рассчитываться по формуле, приведенной в пункте 6.8.2.1.18. Tanks made of steels superior to the mild steel defined in RID/ADR now had to be constructed with greater wall thicknesses, since tanks made of mild steel with a tensile strength exceeding 440 N/mm2 were subject to a calculation using the formula in 6.8.2.1.18.
Прочность - как у мягкой стали. Strong as mild steel.
A0 = 27 для исходной мягкой стали; A0 = 27 for the reference mild steel
Пункт 12 доклада: Определение термина " мягкая сталь " Point 12: Definition of “mild steel”
Пункт 12: Неофициальный документ INF.22 (МСАГВ- Изменение определения термина " мягкая сталь ") Item 12: Informal document INF.22 (UIP- Amendment of the definition of “mild steel”)
" Мягкая сталь " означает сталь с минимальной прочностью на разрыв от 360 до 440 Н/мм2. “Mild steel” means a steel having a minimum tensile strength between 360 N/mm2 and 440 N/mm2;
В МПОГ и ДОПОГ содержатся требования, касающиеся минимальной толщины стенок цистерн, изготовленных из мягкой стали. RID and ADR contained requirements for mild steel where minimum wall thicknesses for tanks were concerned.
пластина из мягкой стали размером 200 мм х 200 мм х 20 мм, имеющая следующие механические свойства: Mild steel plate, 200 mm × 200 mm × 20 mm, having the following mechanical properties:
Представитель МСАГВ разъяснил проблему, возникшую в результате уменьшения значений предела прочности на разрыв мягкой стали S355J2G3 в стандарте EN 10025. The representative of UIP presented the problem arising from the reduction of values for the tensile strength of S355J2G3 mild steel in standard EN 10025.
е0 = минимальная толщина для мягкой стали в соответствии с пунктами 6.8.2.1.18 и 6.8.2.1.19; eo = minimum thickness for mild steel according to 6.8.2.1.18 and 6.8.2.1.19;
В случае использования других металлов, кроме мягкой стали, эти значения минимальной толщины стенок должны перерассчитываться в зависимости от характеристик выбранного металла. If metals other than mild steel were used, these minimum wall thicknesses should be converted according to the characteristics of the metal selected.
К задней части трубы приварена круглая металлическая плита такой же толщины и диаметра, к которой крепятся стабилизаторы, изготовленные из мягкой стали. A circular metal plate of the same thickness and diameter is welded to the rear of the tube, to which is further attached a mild steel fin assembly.
е0 = минимальная толщина для мягкой стали, в мм, в соответствии с 6.8.2.1.18 и 6.8.2.1.19; eo = minimum shell thickness for mild steel, in mm, according to 6.8.2.1.18 and 6.8.2.1.19;
Тело должно быть выполнено из мягкой стали в виде твердой пластины размером 1 м ? 1 м и должно падать в горизонтальном положении. The mass shall consist of a solid mild steel plate 1 m by 1 m and shall fall in a horizontal attitude.
е0 = минимальная толщина корпуса из мягкой стали, в мм, в соответствии с 6.8.2.1.18 и 6.8.2.1.19; eo = minimum shell thickness for mild steel, in mm, according to 6.8.2.1.18 and 6.8.2.1.19;
Для материалов, не являющихся мягкой сталью, эквивалентная толщина стенок корпуса должна определяться в соответствии с пунктом 6.8.2.1.18 МПОГ/ДОПОГ. For material other than mild steel, equivalent tank-wall thickness has to be determined in accordance with RID/ADR paragraph 6.8.2.1.18.
" е0 = минимальная толщина корпуса для мягкой стали в соответствии с пунктами 6.8.2.1.18 и 6.8.2.1.19, в мм ". " e0 = minimum shell thickness for mild steel according to 6.8.2.1.18 and 6.8.2.1.19, in mm ".
Если, однако, использовать более прочный материал S355J2 + N, обладающий более высоким показателем поглощения энергии, то он находится в невыгодном положении, так как выходит за рамки нынешнего определения мягкой стали. The more resistant S355J2 + N material, with greater energy absorption, is at a disadvantage, not being covered by the current definition of mild steel.
значения толщины стенок цистерн, требуемые согласно пунктам 6.8.2.1.18 и 19, должны будут отвечать некоторым минимальным требованиям, обусловленным выбором определенного металлического материала (мягкая сталь/стандартная мягкая сталь). the thickness of the tank walls in accordance with 6.8.2.1.18 and 19 will be subject to certain minimum requirements in relation with the choice of a specific metallic material (mild steel, or reference mild steel).
Les exemples sont fournis uniquement à des fins linguistiques, c'est-à-dire pour étudier l'utilisation de mots dans une langue et leurs traductions dans une autre. Ils sont extraits automatiquement des sources ouvertes en utilisant des algorithmes de recherche de données bilingues. Si vous trouvez une erreur d'orthographe, de ponctuation ou autre soit dans l'original ou dans la traduction, utilisez l'option "Signaler un problème" ou écrivez-nous.

Qu’est-ce que la traduction en contexte sur PROMT.One ?

La section « Contextes » de PROMT.One est votre outil de traduction en contexte, qui vous permet de trouver de vrais exemples d’usage de mots et d’expressions. Il vous suffit de saisir un mot, et le service affichera sa traduction en contexte : des phrases issues de sources bilingues où ce mot est utilisé avec sa traduction dans la langue cible. Cette approche aide à comprendre les nuances de sens et le bon usage dans la langue, qu’il s’agisse d’un terme rare ou d’une expression courante.

Des millions d’exemples d’usage tirés de textes authentiques

Des millions d’exemples de traduction sont collectés automatiquement à partir de textes déjà traduits : documents, sites web, livres, dialogues de films, etc. Vous pouvez ainsi voir un mot dans différentes situations, allant du style formel et professionnel au langage familier. Pour plus de confort, les résultats peuvent être filtrés par traduction spécifique ou par thème, et vous pouvez également effectuer une recherche au sein des exemples trouvés afin de repérer rapidement le contexte souhaité.

Comment la traduction en contexte aide à apprendre une langue

En utilisant la section « Contextes », vous enrichissez efficacement votre vocabulaire. Le service montre clairement comment les idiomes, les verbes à particule et les mots polysémiques se traduisent dans différents contextes. Cela facilite l’apprentissage des langues : vous mémorisez les nouveaux mots avec leur usage réel et voyez immédiatement une traduction correcte dans une langue vivante et authentique. Profitez de la traduction en contexte sur PROMT.One : apprendre une langue devient plus simple et plus motivant !

OKEn poursuivant votre navigation, vous acceptez l’utilisation de Cookies ou traceurs pour améliorer et personnaliser votre expérience, réaliser des statistiques d’audiences, vous proposer des produits et services ciblés et adaptés à vos centres d’intérêt et vous offrir des fonctionnalités relatives aux réseaux sociaux. En savoir plus...