Traducción de "liquid-filling machine" al ruso
Traducción
Tu texto ha sido traducido parcialmente.
Puedes traducir no más de 5000 caracteres a la vez.
Publicidad
Traducciones del diccionario para "liquid-filling machine"
Contextos con "liquid-filling machine"
For non-flammable, non-toxic refrigerated liquefied gases (classification codes 3A and 3O) the volume of liquid phase at the filling temperature and at a pressure of 100 kPa (1 bar) shall not exceed 98 % of the water capacity of the pressure receptacle.
Для невоспламеняющихся, нетоксичных охлажденных сжиженных газов (классификационные коды 3А и 3О) объем жидкой фазы при температуре наполнения и при давлении 100 кПа (1 бар) не должен превышать 98 % вместимости сосуда под давлением по воде.
When a packaging design-type has satisfied the approval tests with a standard liquid, the comparable filling substances listed in 6.1.6.2 may be accepted for carriage without further testing, subject to the following conditions:
Если тип конструкции тары выдержал испытания с использованием стандартной жидкости, то все сопоставимые наполнители, перечисленные в 6.1.6.2, могут допускаться к перевозке без проведения других испытаний при следующих условиях:
Arms control, filling battery on the target machine.
Активация оружия, зарядка батарей, двигатели на полную.
“The partial pressure (in bar) of air or other gases in the ullage space being determined by a maximum ullage temperature of 65°C and a liquid expansion due to an increase in mean bulk temperature of tr- tf (tf = filling temperature, usually 15°C; tr = maximum mean bulk temperature, 50°C) or 0.5 bar.”
" парциального давления (в барах) воздуха или других газов в пространстве над уровнем вещества, определяемого на основе максимальной температуры газовоздушной среды, равной 65°С, и расширения жидкости в результате повышения средней объемной температуры tr- tf (tf = температура наполнения, составляющая обычно 15°С; tr = максимальная средняя объемная температура, равная 50°С); или 0,5 бар ".
The design of a package intended for liquid radioactive material shall make provision for ullage to accommodate variations in the temperature of the contents, dynamic effects and filling dynamics.
В конструкции упаковки, предназначенной для жидкого радиоактивного материала, должно быть предусмотрено наличие дополнительного незаполненного объема для компенсации изменения температуры содержимого, динамических эффектов и динамики заполнения.
Los ejemplos del uso de palabras en diferentes contextos se proporcionan únicamente con fines lingüísticos, es decir, para estudiar el uso de palabras en un idioma y sus opciones de traducción a otro. Están recopilados automáticamente de fuentes abiertas utilizando tecnología de búsqueda basada en datos bilingües. Si encuentras un error ortográfico o de puntuación en el original o en la traducción, utiliza la opción "Informar de un problema" o escríbenos.
Testimonials
Publicidad