Exemples d’usage de "maximum working pressure" en anglais avec traduction en russe

<>
A maximum working pressure exceeding 207 MPa; максимальное рабочее давление более 207 МПа;
a leakproofness test at the maximum working pressure and, " проверку герметичности при максимальном рабочем давлении; и ".
For refrigerated liquefied gases: 90 % of the maximum working pressure. в случае охлажденных сжиженных газов: 90 % от максимального рабочего давления ".
Replace " maximum allowable working pressure " (MAWP) with " maximum working pressure ". Вместо " максимально допустимое рабочее давление (МДРД) " читать " максимальное рабочее давление ".
They shall be rated according to the maximum working pressure. Они должны быть рассчитаны на максимальное рабочее давление.
the maximum working pressure when a leakproofness test is performed after assembly; максимального рабочего давления, когда испытание на герметичность проводится после сборки;
The NOTE to the definition for " Maximum working pressure " becomes NOTE 1. ПРИМЕЧАНИЕ к определению " Максимальное рабочее давление " становится ПРИМЕЧАНИЕМ 1.
Add " at the maximum working pressure " after " leakproofness test " in the first sentence Включить слова " при максимальном рабочем давлении " после слов " проверку герметичности " в первом предложении.
Current NOTE to the definition of " Maximum working pressure (gauge pressure) " becomes NOTE 1. ПРИМЕЧАНИЕ к определению " Максимальное рабочее давление (манометрическое давление) " становится ПРИМЕЧАНИЕМ 1.
for refrigerated liquefied gases, corresponds to at least 90 % of the maximum working pressure. не менее 90 % максимального рабочего давления в случае охлажденных сжиженных газов ".
A decrease of the maximum allowable working pressure, or maximum working pressure, not affecting thickness; уменьшение максимально допустимого рабочего давления или максимального рабочего давления, не влияющее на толщину стенок;
". In Table 1, amend the values in columns " Test pressure " and " Maximum working pressure " as follows: В таблице 1 изменить значения, указанные в колонках " Испытательное давление " и " Максимальное рабочее давление " следующим образом:
In Table 1, in the heading of column 11, replace " Working pressure, bar " with " Maximum working pressure, bar " В таблице 1, в заголовке колонки 11, заменить " Рабочее давление, бар " на " Максимальное рабочее давление, бар ".
In Table 1, in the heading of column 13, replace " Working pressure, bar " with " Maximum working pressure, bar " В таблице 1, в заголовке колонки 13, заменить " Рабочее давление, бар " на " Максимальное рабочее давление, бар ".
In the definition of " Maximum working pressure ", Note 2, replace " 6.2.1.3.3.5 " with " 6.2.1.3.6.5 ". В примечании 2 к определению термина " Максимальное рабочее давление " заменить " 6.2.1.3.3.5 " на " 6.2.1.3.6.5 ".
In the definition for " maximum working pressure ", Note 2, replace " 6.2.1.3.3.5 " with " 6.2.1.3.6.5 ". В примечании 2 к определению " максимальное рабочее давление " заменить " 6.2.1.3.3.5 " на " 6.2.1.3.6.5 ".
The working group recognized Belgium's concern to make a better distinction between the definitions of “maximum allowable working pressure” and “maximum working pressure”. Рабочая группа отметила стремление Бельгии провести более четкое различие между определениями " максимально допустимого рабочего давления " и " максимального рабочего давления ".
In the table, under " For tanks with a maximum working pressure not exceeding … " and under " For tanks intended for the carriage of liquid petroleum products … ": В таблице после " Для цистерн, имеющих максимальное рабочее давление не более … " и после " Для цистерн, предназначенных для перевозки жидких нефтепродуктов … ":
RID/ADR specifies that the leakproofness test for a tank must be carried out at a pressure at least equal to the maximum working pressure (MWP). В МПОГ/ДОПОГ указано, что испытание цистерны на герметичность должно проводиться под давлением, по крайней мере равном максимальному рабочему давлению (МРД).
The test pressure for cryogenic receptacles, closed, shall not be less than 1.3 times the maximum working pressure increased by 1 bar for vacuum insulated receptacles. Испытательное давление для закрытых криогенных сосудов должно не менее чем в 1,3 раза превышать максимальное рабочее давление, увеличенное на 1 бар в случае сосудов с вакуумной изоляцией.
Les exemples sont fournis uniquement à des fins linguistiques, c'est-à-dire pour étudier l'utilisation de mots dans une langue et leurs traductions dans une autre. Ils sont extraits automatiquement des sources ouvertes en utilisant des algorithmes de recherche de données bilingues. Si vous trouvez une erreur d'orthographe, de ponctuation ou autre soit dans l'original ou dans la traduction, utilisez l'option "Signaler un problème" ou écrivez-nous.

Qu’est-ce que la traduction en contexte sur PROMT.One ?

La section « Contextes » de PROMT.One est votre outil de traduction en contexte, qui vous permet de trouver de vrais exemples d’usage de mots et d’expressions. Il vous suffit de saisir un mot, et le service affichera sa traduction en contexte : des phrases issues de sources bilingues où ce mot est utilisé avec sa traduction dans la langue cible. Cette approche aide à comprendre les nuances de sens et le bon usage dans la langue, qu’il s’agisse d’un terme rare ou d’une expression courante.

Des millions d’exemples d’usage tirés de textes authentiques

Des millions d’exemples de traduction sont collectés automatiquement à partir de textes déjà traduits : documents, sites web, livres, dialogues de films, etc. Vous pouvez ainsi voir un mot dans différentes situations, allant du style formel et professionnel au langage familier. Pour plus de confort, les résultats peuvent être filtrés par traduction spécifique ou par thème, et vous pouvez également effectuer une recherche au sein des exemples trouvés afin de repérer rapidement le contexte souhaité.

Comment la traduction en contexte aide à apprendre une langue

En utilisant la section « Contextes », vous enrichissez efficacement votre vocabulaire. Le service montre clairement comment les idiomes, les verbes à particule et les mots polysémiques se traduisent dans différents contextes. Cela facilite l’apprentissage des langues : vous mémorisez les nouveaux mots avec leur usage réel et voyez immédiatement une traduction correcte dans une langue vivante et authentique. Profitez de la traduction en contexte sur PROMT.One : apprendre une langue devient plus simple et plus motivant !