Ejemplos del uso de "число оборотов" en ruso

<>
Traducciones: todos127 speed123 otras traducciones4
Низкое число оборотов (nlo): об/мин Low speed (nlo): rpm
Высокое число оборотов (nhi): об/мин High speed (nhi): rpm
Низкое число оборотов (nlo): мин.-1 Low speed (nlo): min-1
Число оборотов B = nlo + 50 % (nhi- nlo) Speed B = nlo + 50 % (nhi- nlo)
Число оборотов C = nlo + 75 % (nhi- nlo) Speed C = nlo + 75 % (nhi- nlo)
число оборотов в конце диапазона: мин.-1 speed at the end of range: min-1
число оборотов в начале диапазона: мин.-1 speed at the beginning of range: min-1
s- номинальное число оборотов двигателя в мин-1, s is the rated engine speed in min-1,
nidle- число оборотов холостого хода в мин-1, nidle is the idling speed in min-1,
число оборотов двигателя в ходе испытания, включая любые допуски, the engine speed during the test, including any tolerances,
Уравнение A13-2, нормированное число оборотов на передачах > 1 Equation A13-2, normalised upshift speed in gears > 1
nlo- наименьшее число оборотов, при которых мощность составляет 55 % от максимальной мощности, nlo is the lowest speed where the power is 55 per cent of maximum power
Уравнение A13-1, нормированное число оборотов на 1-й передаче (передаче 1). Equation A13-1, normalised upshift speed in 1st gear (gear 1).
nhi- наибольшее число оборотов, при которых мощность составляет 70 % от максимальной мощности nhi is the highest speed where the power is 70 per cent of maximum power.
n95h- наибольшее число оборотов, при котором мощность составляет 95 % от максимальной мощности. n95h is the highest speed where the power is 95 per cent of maximum power.
npref- число оборотов двигателя, при которых максимальный интеграл крутящего момента составляет 51 % от полного интеграла npref is the engine speed where the max. torque integral is 51 per cent of the whole integral
" максимальный крутящий момент " означает число оборотов двигателя, при котором достигается максимальный крутящий момент двигателя, указанный заводом-изготовителем. " maximum torque speed " means the engine speed at which the maximum torque is obtained from the engine, as specified by the manufacturer.
Число оборотов двигателя и нагрузка в режиме переходов продолжительностью 20 ± 1 секунда между испытательными точками должны изменяться линейно. The transitions between the test points shall be linear for engine speed and load and shall last 20 ± 1 seconds.
Должна быть включена такая передача, при которой число оборотов двигателя (мин.-1) не превышает предписанной изготовителем максимальной величины. The gear engaged must be such that the speed of the engine (min-1) does not exceed the maximum value prescribed by the manufacturer.
Номинальное число оборотов двигателя, указанное заводом-изготовителем, не должно отличаться от измеренного значения более чем на 100 мин.-1. The rated speed declared by the manufacturer shall not deviate by more than 100 min-1 from the declared value.
Los ejemplos del uso de palabras en diferentes contextos se proporcionan únicamente con fines lingüísticos, es decir, para estudiar el uso de palabras en un idioma y sus opciones de traducción a otro. Están recopilados automáticamente de fuentes abiertas utilizando tecnología de búsqueda basada en datos bilingües. Si encuentras un error ortográfico o de puntuación en el original o en la traducción, utiliza la opción "Informar de un problema" o escríbenos.

En esta sección, puedes ver cómo se usan las palabras y expresiones en diferentes contextos con los ejemplos de traducciones realizadas por profesionales. La sección Contextos te ayudara a aprender inglés, alemán, español y otros idiomas. Aquí puedes encontrar ejemplos con las frases verbales, expresiones idiomáticas y palabras ambiguas en textos de diferentes estilos y temas.

Los ejemplos se pueden ordenar por traducciones y temas, y también se puede realizar una búsqueda más precisa en los ejemplos encontrados.