Sentence examples of "emptying" in English with translation "опорожнять"

<>
But where filling and emptying are concerned, the situation is less straightforward. Однако, если речь идет о наполнении и опорожнении, ситуация не столь очевидна.
Frequent mixing and emptying should be avoided wherever possible because these operations increase ammonia emission. По возможности следует избегать частого перемешивания и опорожнения емкостей, поскольку эти операции приводят к увеличению выбросов аммиака.
Filling and emptying road tankers requires two hoses or pipes to be connected to the tanker. Для наполнения и опорожнения автоцистерн требуется подсоединение к ним двух шлангов или туб.
For example, one preventive measure could be the emptying of tanks containing very dangerous chemicals at the outbreak of hostilities. Например, такие превентивные меры могут включать опорожнение емкостей с опасными химическими веществами при начале военных действий.
Seals of openings shall be so arranged as to avoid any damage by the operation, filling and emptying of the bulk container. Уплотнения отверстий должны быть устроены таким образом, чтобы исключалась возможность любого повреждения в результате эксплуатации, наполнения и опорожнения контейнера для массовых грузов.
The term “discharge” is defined as “any emission and includes, but is not limited to, spilling, leaking, pumping, pouring, emitting, emptying, or dumping”. Термин " сброс " определяется как " любой выброс … и включает в себя, но не только, разлив, утечку, откачку, слив, выброс, опорожнение или сброс ".
Openings for filling, emptying and venting in the bodies or heads of non-removable head (1N1) drums shall not exceed 7 cm in diameter. Горловины для наполнения, опорожнения и удаления паров в корпусе или днищах барабанов с несъемным днищем (1N1) не должны превышать 7 см в диаметре.
Openings for filling, emptying and venting in the bodies or heads of non-removable head (1A1) drums shall not exceed 7 cm in diameter. Горловины для наполнения, опорожнения и удаления паров в корпусе или днищах барабанов с несъемным днищем (1A1) не должны превышать 7 см в диаметре.
Openings for filling, emptying and venting in the bodies or heads of non-removable head (0A1) packagings shall not exceed 7 cm in diameter. Горловины для наполнения, отверстия для опорожнения и вентиляционные отверстия в корпусе или днищах тары с несъемным днищем (0A1) не должны превышать 7 см в диаметре.
Openings for filling, emptying and venting in the bodies or heads of non-removable head drums (1H1) and jerricans (3H1) shall not exceed 7 cm in diameter. Горловины для наполнения, опорожнения и удаления паров в корпусе или днищах барабанов с несъемным днищем (1H1) и канистр с несъемным днищем (3H1) с несъемным днищем не должны превышать 7 см в диаметре.
This can be achieved by adding to the definition of carriage in 1.2.1 the activity of loading, unloading, filling and emptying, covered by Annexes A and B. Этого можно достигнуть путем добавления в определение термина " перевозка " в разделе 1.2.1 операций по погрузке, разгрузке, наполнению и опорожнению, которые охватываются приложениями А и В.
It is a truth universally acknowledged, that a man going into a public toilet for the purpose of emptying his bladder will stand at a urinal a reasonable distance away from men already present. Широко известен тот факт, что мужчина, использующий общественный туалет в целях опорожнения своего мочевого пузыря, выбирая писсуар, должен оказаться на достаточном расстоянии от уже присутствующих посетителей.
The Government of Belgium is of the opinion that filling and emptying should always be allowed within the RID/ADR framework (with an exception of course for the old gas receptacles, built according to national codes). Правительство Бельгии придерживается того мнения, что в рамках МПОГ/ДОПОГ наполнение и опорожнение следует разрешать во всех случаях (за исключением, конечно же, старых сосудов для газов, изготовленных в соответствии с национальными правилами).
Emptying is always permitted, as there would be no benefit in carrying receptacles with dangerous goods all around Europe, if taking those goods out of the receptacle to use them were not allowed at their destination. Опорожнение разрешается всегда, поскольку нет никакого смысла перевозить сосуды с опасными грузами по всей Европе, если в месте назначения извлечение этих грузов из сосуда для их последующего использования не разрешается.
The filling or emptying of receptacles, road tank vehicles tank wagons, intermediate bulk containers (IBCs), [large packagings, MEGCs] portable tanks or tank-containers on board the vessel is prohibited without special permission from the competent [local] authority. Запрещается производить на борту судна операции по наполнению или опорожнению емкостей, автоцистерн, вагонов-цистерн, контейнеров средней грузоподъемности для массовых грузов (КСГМГ), [крупногабаритной тары, МЭГК] переносных цистерн или контейнеров-цистерн без специального разрешения [местного] компетентного органа.
11 414 (7) HA06: While these substances or articles are being loaded or unloaded, no loading or unloading operations shall take place in the other holds and no filling or emptying of fuel tanks shall be allowed. 11 414 (7) HA06: Во время погрузки или выгрузки этих веществ или изделий погрузка в другие трюмы или выгрузка из них, а также наполнение или опорожнение топливных емкостей не разрешаются.
In many cities of Africa and Asia, pit latrine infrastructure is more developed than the waste treatment and disposal infrastructure, but emptying latrines in densely populated urban areas requires an extensive service infrastructure, including proper disposal facilities. Во многих городах Африки и Азии инфраструктура выгребных ям является более развитой, чем инфраструктура очистки и удаления отходов, однако опорожнение отхожих ям в густонаселенных городских районах требует разветвленной сети обслуживания, включая надлежащие средства удаления отходов.
“Additive device: a system of receptacles up to 450 l total capacity and of pipes, valves and pumps which is connected with the emptying device of a tank serving for the admixture of additives to the main load during discharging.” «" Устройство для добавления присадок " означает систему сосудов общей вместимостью до 450 л, а также труб, клапанов и насосов, которая соединена с разгрузочным устройством цистерны и служит для добавления присадок в основной груз в процессе опорожнения».
It may, in particular, consist of one or more receptacles, absorbent materials, spacing structures, radiation shielding and service equipment for filling, emptying, venting and pressure relief; devices for cooling, absorbing mechanical shocks, handling and tie-down, thermal insulation; and service devices integral to the package. В частности, он может включать одну или несколько приемных емкостей, поглощающие материалы, дистанционирующие конструкции, средства защиты от излучения и сервисное оборудование для заполнения, опорожнения, вентилирования и сброса давления; устройства для охлаждения, амортизации механических ударов, обработки груза и крепления, тепловой изоляции; а также сервисные устройства, составляющие одно целое с упаковкой.
“Release” means any spilling, leaking, pumping, pouring, emitting, emptying, discharging, underground injecting, escaping, evaporating, leaching, dumping or disposing into the environment (including the abandonment or discarding of barrels, containers and other closed receptacles or resulting from the off-site use of products), whether deliberate or accidental, routine or non-routine; " Выброс " означает любой разлив, утечку, нагнетание, слив, эмиссию, опорожнение, выпуск, подземную закачку, улетучивание, испарение, вымывание, сброс или удаление в окружающую среду (в том числе в результате свалки или выбрасывания бочек, контейнеров и других закрытых емкостей или использования продуктов за пределами объекта), независимо от того, являются ли они преднамеренными или аварийными, плановыми или внеплановыми;
Examples of word usage in different contexts are provided solely for linguistic purposes, i.e. to study word usage in a sentence in one language and how they can be translated into another. All samples are automatically collected from a variety of publicly available open sources using bilingual search technologies.
If you find a spelling, punctuation or any other error in the original or translation, use the "Report a problem" option or write to us.

What is translation in context on PROMT.One

The “Contexts” section on PROMT.One is your translation-in-context tool that helps you find real examples of how words and phrases are used. Just enter a word and the service will show its translation in context — sentences from bilingual sources where this word is used together with its translation into the target language. This helps you understand subtle shades of meaning and correct usage in speech, whether it is a rare term or a common everyday phrase.

Millions of usage examples from real texts

Millions of translation examples are collected automatically from already translated texts: documents, websites, books, movie dialogues and more. Thanks to this, you can see a word in different situations — from formal business style to everyday colloquial speech. For convenience, the results can be filtered by a specific translation or topic, and you can also search within the examples found to quickly focus on the context you need.

How translation in context helps you learn a language

By using the “Contexts” section, you can effectively expand your vocabulary. The service clearly shows how idioms, phrasal verbs and polysemantic words are translated in different contexts. This makes language learning easier: you remember new words together with their real usage and immediately see correct translations in authentic, living language. Take advantage of context-based translation on PROMT.One — learning a language becomes easier and more engaging!