PROMT.One

Usage examples of "число оборотов" in Russian with translation to English

Низкое число оборотов (nlo): мин.-1 Low speed (nlo): min-1
Высокое число оборотов (nhi): об/мин High speed (nhi): rpm
Низкое число оборотов (nlo): об/мин Low speed (nlo): rpm
число оборотов в начале диапазона: мин.-1 speed at the beginning of range: min-1
Число оборотов B = nlo + 50 % (nhi- nlo) Speed B = nlo + 50 % (nhi- nlo)
Число оборотов C = nlo + 75 % (nhi- nlo) Speed C = nlo + 75 % (nhi- nlo)
число оборотов в конце диапазона: мин.-1 speed at the end of range: min-1
s- номинальное число оборотов двигателя в мин-1, s is the rated engine speed in min-1,
nidle- число оборотов холостого хода в мин-1, nidle is the idling speed in min-1,
Уравнение A13-2, нормированное число оборотов на передачах > 1 Equation A13-2, normalised upshift speed in gears > 1
число оборотов двигателя в ходе испытания, включая любые допуски, the engine speed during the test, including any tolerances,
nlo- наименьшее число оборотов, при которых мощность составляет 55 % от максимальной мощности, nlo is the lowest speed where the power is 55 per cent of maximum power
Уравнение A13-1, нормированное число оборотов на 1-й передаче (передаче 1). Equation A13-1, normalised upshift speed in 1st gear (gear 1).
n95h- наибольшее число оборотов, при котором мощность составляет 95 % от максимальной мощности. n95h is the highest speed where the power is 95 per cent of maximum power.
nhi- наибольшее число оборотов, при которых мощность составляет 70 % от максимальной мощности nhi is the highest speed where the power is 70 per cent of maximum power.
npref- число оборотов двигателя, при которых максимальный интеграл крутящего момента составляет 51 % от полного интеграла npref is the engine speed where the max. torque integral is 51 per cent of the whole integral
" максимальный крутящий момент " означает число оборотов двигателя, при котором достигается максимальный крутящий момент двигателя, указанный заводом-изготовителем. " maximum torque speed " means the engine speed at which the maximum torque is obtained from the engine, as specified by the manufacturer.
Число оборотов двигателя и нагрузка в режиме переходов продолжительностью 20 ± 1 секунда между испытательными точками должны изменяться линейно. The transitions between the test points shall be linear for engine speed and load and shall last 20 ± 1 seconds.
Должна быть включена такая передача, при которой число оборотов двигателя (мин.-1) не превышает предписанной изготовителем максимальной величины. The gear engaged must be such that the speed of the engine (min-1) does not exceed the maximum value prescribed by the manufacturer.
Номинальное число оборотов двигателя, указанное заводом-изготовителем, не должно отличаться от измеренного значения более чем на 100 мин.-1. The rated speed declared by the manufacturer shall not deviate by more than 100 min-1 from the declared value.
Examples of word usage in different contexts are provided solely for linguistic purposes, i.e. to study word usage in a sentence in one language and how they can be translated into another. All samples are automatically collected from a variety of publicly available open sources using bilingual search technologies.
If you find a spelling, punctuation or any other error in the original or translation, use the "Report a problem" option or write to us.

What is translation in context on PROMT.One

The “Contexts” section on PROMT.One is your translation-in-context tool that helps you find real examples of how words and phrases are used. Just enter a word and the service will show its translation in context — sentences from bilingual sources where this word is used together with its translation into the target language. This helps you understand subtle shades of meaning and correct usage in speech, whether it is a rare term or a common everyday phrase.

Millions of usage examples from real texts

Millions of translation examples are collected automatically from already translated texts: documents, websites, books, movie dialogues and more. Thanks to this, you can see a word in different situations — from formal business style to everyday colloquial speech. For convenience, the results can be filtered by a specific translation or topic, and you can also search within the examples found to quickly focus on the context you need.

How translation in context helps you learn a language

By using the “Contexts” section, you can effectively expand your vocabulary. The service clearly shows how idioms, phrasal verbs and polysemantic words are translated in different contexts. This makes language learning easier: you remember new words together with their real usage and immediately see correct translations in authentic, living language. Take advantage of context-based translation on PROMT.One — learning a language becomes easier and more engaging!

OKBy continuing to use this website you agree with our use of cookies. We and our partners will collect data and use cookies for ad personalization and measurement. Learn how