Translation of "liquid-filling machine" to Russian
Translation results
Your text has been partially translated.
You can translate a maximum of 5000 characters at a time.
Advert
Dictionary translations for "liquid-filling machine"
Contexts with "liquid-filling machine"
For non-flammable, non-toxic refrigerated liquefied gases (classification codes 3A and 3O) the volume of liquid phase at the filling temperature and at a pressure of 100 kPa (1 bar) shall not exceed 98 % of the water capacity of the pressure receptacle.
Для невоспламеняющихся, нетоксичных охлажденных сжиженных газов (классификационные коды 3А и 3О) объем жидкой фазы при температуре наполнения и при давлении 100 кПа (1 бар) не должен превышать 98 % вместимости сосуда под давлением по воде.
When a packaging design-type has satisfied the approval tests with a standard liquid, the comparable filling substances listed in 6.1.6.2 may be accepted for carriage without further testing, subject to the following conditions:
Если тип конструкции тары выдержал испытания с использованием стандартной жидкости, то все сопоставимые наполнители, перечисленные в 6.1.6.2, могут допускаться к перевозке без проведения других испытаний при следующих условиях:
Arms control, filling battery on the target machine.
Активация оружия, зарядка батарей, двигатели на полную.
“The partial pressure (in bar) of air or other gases in the ullage space being determined by a maximum ullage temperature of 65°C and a liquid expansion due to an increase in mean bulk temperature of tr- tf (tf = filling temperature, usually 15°C; tr = maximum mean bulk temperature, 50°C) or 0.5 bar.”
" парциального давления (в барах) воздуха или других газов в пространстве над уровнем вещества, определяемого на основе максимальной температуры газовоздушной среды, равной 65°С, и расширения жидкости в результате повышения средней объемной температуры tr- tf (tf = температура наполнения, составляющая обычно 15°С; tr = максимальная средняя объемная температура, равная 50°С); или 0,5 бар ".
The design of a package intended for liquid radioactive material shall make provision for ullage to accommodate variations in the temperature of the contents, dynamic effects and filling dynamics.
В конструкции упаковки, предназначенной для жидкого радиоактивного материала, должно быть предусмотрено наличие дополнительного незаполненного объема для компенсации изменения температуры содержимого, динамических эффектов и динамики заполнения.
Examples of word usage in different contexts are provided solely for linguistic purposes, i.e. to study word usage in a sentence in one language and how they can be translated into another. All samples are automatically collected from a variety of publicly available open sources using bilingual search technologies.
If you find a spelling, punctuation or any other error in the original or translation, use the "Report a problem" option or write to us.
If you find a spelling, punctuation or any other error in the original or translation, use the "Report a problem" option or write to us.
Testimonials
Advert