Exemples d'utilisation de "ldap server port" en anglais
In the Proxy port box, type the proxy server port number.
В поле Порт прокси-сервера введите номер порта прокси-сервера.
All available IPv4 and IPv6 addresses on the server on port 143 (we aren't using the UnencryptedOrTLSBindings parameter, and the default value is [::]:143,0.0.0.0:143).
Внутренний IP-адрес сервера Exchange Server и TCP-порт для незашифрованных соединений или соединений с шифрованием STARTTLS: все доступные адреса IPv4 и IPv6 на сервере на порту 143 (мы не используем параметр UnencryptedOrTLSBindings, а по умолчанию используется значение [::]:143,0.0.0.0:143).
All available IPv4 and IPv6 addresses on the server on port 995 (we aren't using the SSLBindings parameter, and the default value is [::]:995,0.0.0.0:995).
Все доступные адреса IPv4 и IPv6 на сервере для порта 995 (мы не используем параметр SSLBindings, а по умолчанию задано значение [::]:995,0.0.0.0:995).
All available IPv4 and IPv6 addresses on the server on port 110 (we aren't using the UnencryptedOrTLSBindings parameter, and the default value is [::]:110,0.0.0.0:110).
Все доступные адреса IPv4 и IPv6 на сервере для порта 110 (мы не используем параметр UnencryptedOrTLSBindings, а по умолчанию задано значение [::]:110,0.0.0.0:110).
All available IPv4 and IPv6 addresses on the server on port 993 (we aren't using the SSLBindings parameter, and the default value is [::]:993,0.0.0.0:993).
Внутренний IP-адрес сервера Exchange Server и TCP-порт для соединений с шифрованием TLS: все доступные адреса IPv4 и IPv6 на сервере на порту 993 (мы не используем параметр SSLBindings, а по умолчанию используется значение [::]:993,0.0.0.0:993).
The data must be given in the following format: "[internet address of the server] : [port number]" (without spaces).
Запись должна иметь формат: "[интернет-адрес сервера] : [номер порта]" (без пробелов).
0.0.0.0:25 (listen for inbound messages on all IP addresses that are configured on all network adapters in the Exchange server on TCP port 25.)
Привязки: 0.0.0.0:25 (прослушивание всех IP-адресов, настроенных на всех сетевых адаптерах на сервере Exchange на TCP-порте 25.)
If you need to enter specific values for incoming and outgoing server names, port numbers, or SSL settings, you can use Outlook's advanced setup option.
Если вам нужно ввести определенные значения для имен серверов входящей и исходящей почты, номеров портов и параметров SSL, вы можете воспользоваться расширенной настройкой.
To allow external POP3 clients to connect to mailboxes, you need to configure the POP3 server FQDN, TCP port, and encryption method for external connections.
Чтобы разрешить внешним клиентам POP3 подключаться к почтовым ящикам, необходимо настроить полное доменное имя сервера POP3, TCP-порт и метод шифрования для внешних подключений.
To allow external IMAP4 clients to connect to mailboxes, you need to configure the IMAP4 server FQDN, TCP port, and encryption method for external connections.
Чтобы разрешить внешним клиентам IMAP4 подключаться к почтовым ящикам, необходимо настроить полное доменное имя сервера IMAP4, TCP-порт и метод шифрования для внешних подключений.
To view or modify the SMTP virtual server listening port
Чтобы просмотреть или изменить порт прослушивания виртуального SMTP-сервера
For this scenario, the Edge Transport server listens on port 25, but only from the IP address of the specified Mailbox servers.
В этом сценарии пограничный транспортный сервер прослушивает порт 25 на наличие подключений только с IP-адреса указанных серверов почтовых ящиков.
The newly set server address and port number are stored on the hard disk.
Вновь установленные адрес сервера и порт сохраняются на жестком диске.
This example creates a new Receive connector named Internet Receive Connector on a Mailbox server that listens on port 25 on the local IP address 10.1.15 from all remote IP addresses:
Приведенный ниже пример кода создает соединитель получения с названием "Internet Receive Connector" (Соединитель получения сообщений из Интернета) на сервере почтовых ящиков, который прослушивает локальный IP-адрес 10.1.15 на порту 25, проверяя наличие подключений со всех удаленных IP-адресов.
The record must be made in the following format "[server web address] : [port number]".
Запись должна быть в формате "[интернет-адрес сервера] : [номер порта]".
You've configured a custom Receive connector in the Transport (Hub) service on a Mailbox server that listens on port 25.
Вы настроили пользовательский соединитель получения в службе транспорта (концентратора) на сервере почтовых ящиков, который прослушивает порт 25.
Les exemples sont fournis uniquement à des fins linguistiques, c'est-à-dire pour étudier l'utilisation de mots dans une langue et leurs traductions dans une autre. Ils sont extraits automatiquement des sources ouvertes en utilisant des algorithmes de recherche de données bilingues. Si vous trouvez une erreur d'orthographe, de ponctuation ou autre soit dans l'original ou dans la traduction, utilisez l'option "Signaler un problème" ou écrivez-nous.
Dans cette section, vous pouvez voir comment les mots et les expressions sont utilisés dans différents contextes à l'aide d'exemples de traductions faites par des professionnels. La section Contextes vous aidera à apprendre l'anglais, l'allemand, l'espagnol et d'autres langues. Vous trouverez ici des exemples de verbes à particule et d'expressions idiomatiques dans des textes dont le style et le thème varient. Les exemples peuvent être triés par traductions et domaines thématiques.
Apprenez des langues étrangères, découvrez les traductions de millions de mots et d'expressions avec des exemples réels de leur utilisation grâce à notre technologie de recherche bilingue !
La publicité